walser Walimex Pro 16444, Instruction Manual

10

11

that the holder is posi tioned correctly. The screw must be tightened on the 

slim part of the mounting adapter (1). This reliably prevents the bracket and 

your equipment from  coming loose. The spigot features a 1/4 inch and a 3/8 

inch thread, which you can use to attach equipment. Note, however, that these 

threads have a lower load-bearing capacity than the spigot.  

Please note the maximum load capacity, see technical specifications.

Instructions for use and care of the support stand

■

Only attach the support to ceilings with sufficient load-bearing capacity. 

■

Observe the instructions regarding the maximum load capacity of your 

tripod model (see technical specifications).

■

Note that moisture reduces the holding force of the locks. Under load, 

the boom can therefore extend towards the floor.  If necessary, dry off the 

boom and extension with a soft, absorbent cloth (e.g. cotton).

■

In general, all elements of this lamp support are maintenance-free. Howe-

ver, regular removal of sand, dust and other impurities is recommended. 

If you notice a scratching or crunching noise when extending the boom, 

please remove the impurities with a soft, moistened cloth. Also check 

the tight fit of the lock (4) and retighten it with an appropriate tool (not 

included) if necessary. The extension can only be removed by completely 

dismantling the lock (4). Opening the screw to the max is not sufficient for 

this.

■

Adjust the extension very carefully, especially when equipment is moun-

ted.. Be aware that there is a danger of hurting someone or damaging 

something.

■

When attaching equipment via the 1/4 or 3/8 inch thread, please note that 

this connection has a lower load capacity than the 16 mm spigot (5/8 inch 

 spigot) connection. For the attachment of heavy equipment, an appropriate 

high-quality bracket is necessary.

Technical specifications

Walimex pro Ceiling-mounted Lamp Support 34 – 54 cm

Item number

16444

Type

Ceiling-mounted lamp support

Maximum extension of the boom

54  cm

Connections

5/8 “ spigot socket on boom,  

with  5/8 “ spigot incl. 1/4 “  

and 3/8 “ thread 

Max. Load capacity of boom

6  kg

Material support and boom

aluminium, metal

Scope of delivery:

1  x Walimex pro Ceiling-mounted Lamp Support 34 – 54 cm 

1  x 5/8 “ spigot incl. 1/4 “ and 3/8 “ thread 

4  x  Heavy-duty  anchors 

1  x  Instruction  manual