Chapter 3 Operations Instructions
TO OPEN PLATFORM
Turn shut-off switch on (located in cab or near
controls).
Always make certain area in which platform will
open is clear.
Push and hold tilt switch then lower switch to unfold
platform.
GR00106
TO RAISE AND LOWER PLATFORM IN LOADING
POSITION
Push raise switch to raise platform
Or
Push lower switch to lower platform
GR00107
TO TILT PLATFORM UP AND DOWN
First push and hold tilt switch, then simultaneously
push raise switch to tilt platform up.
Or
First push and hold tilt switch, then simultaneously
push lower switch to tilt platform down.
GR00108
TO FOLD PLATFORM TO CLOSED POSITION
Make certain platform surface is clear of all objects.
Raise platform to bed level with raise switch.
Push and hold tilt switch then simultaneously push
raise switch to close platform.
Turn shut-off switch off.
When in transit, platform must be closed vertically, and
shut-off switch is to be turned “off.”
GR00110
LOWER
TILT
RAISE
page 10
