Chapter 3 Operations Instructions
Locate Drive Over Operation Decal attached to vehicle
for information on maximum drive over capacity.
Decal 80101499 will show max. capacity of 5,500 lbs.
Decal 80101330 will show max. capacity of 10,000 lbs.
GR02227
Make certain vehicle is properly and securely braked.
Before opening platform, pull both support bars fully out
(4-1/2”).
Tilt platform down to loading dock.
Loading dock must always support end of platform.
Platform must overlap loading dock at least 24”.
Always use the center portion of the platform.
Cargo is to be positioned on cargo carrier so as to be
stable when rolling over inclined platform.
GR00698
Never roll a load onto the platform if:
The loading dock does not support the platform.
Both support bars are not pulled out.
IMPORTANT
!
It may be necessary to readjust tilt of
platform as vehicle is unloaded. The vehicle suspension
may cause the floor level to raise as load is removed.
GR00699
Drive Over Operation
Decal 80101499 or
80101330 would be
attached in this area.
page 14
