Assembly
61
EN
Fixing/loosening the handle
Assembling the wheels
CAUTION!
Wear protective gloves.
• Guide the shaft
10
starting from the
side through the provided holes until
it comes out on the other side.
• Start on one side and insert a shim
8
on the shaft.
• Tilt the power generator slightly and
insert a wheel
5
onto the shaft
such that the longer part of the hole
housing faces inwards.
• Secure the wheel by inserting the
cotter pin
7
through the hole.
• Bend the ends of the cotter pin, e. g.
using pliers.
• Fold the handle
1
backwards and
keep it in this position such that the
housing and handle holes line up.
• Guide the fixing pin
9
on the
respective side through the holes
provided.
• Ensure that the pins for fixing the
handle go through both the fixture
and handle housing.
10
8
7
5
9
1
• Repeat the procedure for the other side and for the second shaft.
K640061_Anleitung_DE_EN_FR_CZ_SI.indb 61
K640061_Anleitung_DE_EN_FR_CZ_SI.indb 61
08.02.2021 14:53:25
08.02.2021 14:53:25
