Using the power generator
63
EN
General instructions for checking and filling engine
oil and petrol
Using the power generator
Safe operation requires the operator to know the functions and positions of the
control elements and displays adequately.
Before using the power generator, familiarise yourself with the following
functions and their correct operation:
−
On / Off switch
−
Overload protection switch
−
Voltmeter
−
Choke lever
−
Pull starter
−
Installation and fixing
Indoor installation
WARNING!
Install the power generator only in rooms where the exhaust gases
can be removed via a suitable exhaust venting device, e. g. in a
workshop.
Ensure that the room has good ventilation.
If you install the power generator in ventilated rooms, additional fire
and explosion protection requirements have to be met.
WARNING!
Fill the engine oil and petrol only when the power generator is
switched off.
Never fill petrol and engine oil near open sources of light, fire or
sparks.
Do not allow the petrol or engine oil to flow over hot parts, e. g. the
engine or exhaust pipe.
K640061_Anleitung_DE_EN_FR_CZ_SI.indb 63
K640061_Anleitung_DE_EN_FR_CZ_SI.indb 63
08.02.2021 14:53:26
08.02.2021 14:53:26