Safety
37
EN
f) Wear appropriate clothing. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If dust extraction and collection units can be installed, they
have to be connected and used properly.
Use of dust collector can
reduce dust-related hazards.
h) Never assume that you are safe enough and disregard the
safety rules for electric power tools, even if you are familiar with
the electric power tool after using it many times.
Carelessness
may lead to serious injury within a fraction of a second.
4) Power tool use and care
a) Do not overload the power tool. Use power tools that are
intended for your work.
The correct power tool will do the job better
and safer at the rate for which it was designed.
b) Do not use the power tool if the switch is faulty.
A power tool
which can no longer be switched on and off is dangerous and has to
be repaired.
c) Disconnect the plug from the socket and/or remove the
battery before making any adjustments, changing tool bits or
accessories or putting the power tool away.
Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
d) Store power tools out of the reach of children when not in
use. Do not allow persons unfamiliar with the power tool or
these instructions, to operate the power tool.
Power tools are
dangerous in the hands of inexperienced users.
e) Maintain the power tools and tool bits carefully. Ensure the
moving parts are functioning correctly and do not getting stuck.
Check if parts are broken or so badly damaged that that the
power tool's functions are impaired. Get damaged parts repaired
before using the power tool.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained tools
with sharp cutting edges are less likely to get stuck and are easier to
control.
g) Use your power tool, accessories and bits etc. according to
these instructions. Consider your working environment and the
type of job you wish to do.
Using power tools for applications other
than those intended can lead to dangerous situations.
