Work instructions
44
EN
Work instructions
CAUTION!
Wear safety glasses to protect your eyes from saw dust or ejected
chips. Wear a dust mask.
When cutting metal, wear safety gloves to protect your hands from
hot and ejected chips.
When sawing, make sure that the sawing shoe is firmly pressed
against the workpiece to prevent vibrations and/or the saw blade
from getting twisted.
Do not apply excessive force on the product.
Excessive pressure may
damage the product or its accessories and increases the risk of injury.
For this reason is it important to always grip the product firmly
with two hands and maintain a stable posture.
The greater the cross
section of the material being sawed, the greater is the force on your arm.
Always secure your workpiece in a vice or in any other clamping
device. Secure particularly large workpieces against sliding or
support them properly.
Base material
Drill type
Plastic
fine-toothed saw blade (not included with the
supply)
Metal
Saw blade for metal
Wood
Saw blade for wood
Selecting the appropriate saw blade
