23
22
Contents
Exploded Drawing
2
Declaration of CE-Conformity
23
Replacement parts
24
1 General
28
1.1
Identification of model version
28
1.2
Normal use
28
1.3
Improper use
29
2
Technical description
29
3
Safety Instructions
21
3.1
Identification of safety instructions 21
3.2
General Safety Instructions
22
4
Connection of input lines
31
5
Operational handling
31
6
Adjusting the spray pattern
32
6.1
Correction of spray pattern imperfections 33
7
Trouble shooting
33
8
Retooling and repairs
34
9
Cleaning
35
10
Disposal of cleaning and servicing substances
36
11
Technical data
36
EC/EU Declaration of Conformity
We, the manufacturers of the equipment, hereby declare under our sole responsibility that the
product(s) described below conform to the essential safety requirements. This declaration will be
rendered invalid if any changes are made to the equipment without prior consultation with us.
Manufacturer
WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation
Manual spray guns PILOT Maxi / -HVLP / -MP
PILOT Maxi
Gravity-feed cup
V 11 613
PILOT Maxi
Material connection
V 11 614
PILOT Max
Suction cup
V 11 619
PILOT Maxi-MP
Gravity-feed cup
V 11 615
PILOT Maxi-MP
Material connection
V 11 616
PILOT Maxi-MP
Suspended pressure cup
V 11 617
PILOT Maxi-HVLP
Gravity-feed cup
V 11 633
PILOT Maxi-HVLP
Material connection
V 11 634
PILOT Maxi-HVLP
Suspended pressure cup
V 11 635
PILOT Maxi-K
Material connection
V 11 618
PILOT Maxi-K
Gravity-feed cup
V 11 626
PILOT Maxi-HVLP-K
Material connection
V 11 620
PILOT Maxi-HVLP-K
Suspended pressure cup
V 11 622
PILOT Maxi-HVLP-K
Gravity-feed cup
V 11 623
Intended purpose
Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006/42/EC
2014/34/EU (ATEX Directives)
DIN EN ISO 12100:2011-3
DIN EN 1127-1:2019
DIN EN 1953:2013
DIN EN ISO 80079-36:2016
Specification according 2014/34/EU
Category 2
Part marking
II 2G Ex h IIC T6 Gb
Tech.File,Ref.:
2404
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is prohibited until
such time as the end product has been proved to conform to the provision of the Directives
2006/42/EC.
Wuppertal, 31 January 2020
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety instructions
provided in the product documentation must be observed at all times.
p.p.
