16
17
Contents
Exploded Drawing
1
Declaration of CE-Conformity
17
Replacement parts
18
1
General
20
1.1
Identification of model version
20
1.2
Normal use
20
1.3
Improper use
21
2
Technical description
21
3
Safety Instructions
21
3.1
Identification of safety instructions
21
3.2
General Safety Instructions
22
4
Connection of input lines
22
5
Operational handling
23
6
Adjusting the spray pattern
23
6.1
Correction of spray pattern
24
7
Retooling and repairs
24
7.1
Replacement of the material nozzle and the air cap
24
7.2
Replacement of the material needle
25
7.3
Replacement of the defective needle packing
25
8
Cleaning and service
25
9
Trouble shooting
26
10
Disposal of cleaning and servicing substances
27
11
Technical data
27
Declaration of CE-Conformity
We, the manufacturers of the equipment, hereby declare under our sole respon-
sibility that the product(s) described below conform to the essential safety requirements.
This declaration will be rendered invalid if any changes are made to the equipment wit-
hout prior consultation with us
.
Manufacturer
WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation
Hand-held Spray Gun
PILOT II
with Gravity-Feed-Cup
V 10 201
Intended purpose
Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006 / 42 / EC
94 / 9 EC (ATEX Directives)
EN ISO 12100-1
EN ISO 12100-2
DIN EN 1953
DIN EN 1127-1
DIN EN 13463-1
Specification according 94 / 9 / EC
Category 2
Part marking
II 2 G c T 6
Tech.File,Ref.:
2403
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is
prohibited until such time as the end product has been proved to conform to the pro-
vision of the Directives 2006 / 42 / EC.
Wuppertal, the 1st of January 2010
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety instructions
provided in the product documentation must be observed at all times.
i.V.
