Rev. 1.5
Operating Manual Table-top Greasing Device TBV-H-0x-xx
Page 14 of 35
Walther Systemtechnik GmbH
–
D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de
–
info@walther-2000.de
7 Taking out of Service
For short interruptions, such as overnight or during weekends switch off main switch. Pressure inside
equipment is removed and electrical power off (check displays).
NOTE
Please follow the maintenance instructions!
7.1 Long-term Interruption
Please observe procedure stated below when taking equipment out of service for longer periods:
Switch off main switch.
Disconnect mains plug.
Pressure inside equipment must be removed (check displays).
NOTE
Please follow the maintenance instructions!
7.2 Shutdown of Device
Please observe the following procedure, when finally shutting down the device:
Switch off main switch.
Disconnect mains plug.
Pressure inside equipment must be removed (check displays).
Drain grease or oil and take care of proper disposal.
WARNING
Danger of accidents und environmental hazard: Do not spill grease or oil.
Ensure proper disposal of grease and oil (hazardous waste).
NOTE
Please follow the maintenance instructions!
