START
START
END
Do Not Glue
67
66
64 x2
65
63
52
62
60
61
59
Cab
1) Insert Cab Glass (59) to Cab (60) and glue in place. Glue
Cab Front (61) below glass as shown. Glue Spotlight (52),
and Small Cab Glass (62) to Roof (63). Glue completed Roof
to Cab and set aside for installation in step 3 below.
Final Assembly
1) When you’re satisfied with the operation and/or
position of the Boom and Dipper Arms, Machinery
House may be glued to Deck or set in place.
2) Glue End Guards (2x 65), Upper (66) and Lower
Boom Bracing (67) to Boom as shown.
3) Glue Completed Cab to Deck.
4) Insert - do not glue - Doors (2x 64) to door tracks
on side of Machinery House; these may be open or
closed as desired.
