Pre Assembly
Before beginning assembly remove the
transportation blocks from the bottom
of each panel.
Nail Bag
50mm Screws x20
40mm Screws x37
30mm Screws x80
30mm Black Screws x23
Felt Tacks x80
30mm
screw
6
30mm
screw
20mm Black Screws x5
P 3
Please retain product label and instructions for future reference
Step 1
Place the door panel (
No. 1
) onto a firm and
level surface and place the door (
No. 5
) into
the opening making sure there is an equal
space of
12mm
around the door.
*Use 2x fascia’s from the fixing kit as a guide
to achieve the correct spacing.
Once in position fix the door to the door panel
with the 3x hinges (
No. 19
) securing each
hinge using 7x30mm black screws.
21x30mm black screws
.
Pre drill
hole
1
19
5
1
2
21
Step 2
Position a window (
No. 6
) into each
window panel (
No. 2
) and secure the
window into place using 4x window
blocks (
No. 21
) and 3x30mm screws
per block.
Ensure to fix the window blocks at
each corner of the window and then
to the upright framing on the window
panel.
24x30mm Screws
Pre drill
hole
8
Step 3
Place the floor (
No. 8
) onto a firm
and level base, making sure that
there is suitable drainage and is
free from areas where standing
water can collect.
12mm
12mm
5
