Step 3
Place the rear panel left
against the floor and the
window panel
Fix the panels together
with 3x50mm screws as shown
in the diagram.
Attach the panel joint using
3x50mm screws.
6x50mm Screws
4
20
Step 4
Following the same
method outlined in step 3,
attach the rear panel right to
the building using 6x50mm
screws.
6x50mm Screws
Pre drill
hole
50mm
screw
Pre drill
hole
50mm
screw
17
16
Step 5
Using 7x50mm screws, fix the
front and rear panel frames to
the top of the panels as shown
in the diagram.
6x50mm Screws
Pre drill
hole
50mm
screw
28
12
11
Step 6
First position the roof support bar
in the centre of the building
between the back corner and the
and the door panel.
Ensure the top
of the roof support bar runs level
with building. Line the support
block with the roof support &
mark its position. Secure the
roof block in place using 4x40mm
screws.
Screw through boards into
the block from the outside.
Secure the front to the door
panel using the “L” Bracket and
4x30mm Screws
4x30mm Screws
4x40mm Screws
Pre drill
hole
30mm
screw
40mm
screw
P 4
Please retain product label and instructions for future reference
For assistance please contact customer care on: 01636 821215
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
