WamBam EVEN STEVEN Assembly Instructions Manual Download

Page: 2 / 20

WWW.

WAMBAM

FENCE.COM

ASSEMBLY

INSTRUCTIONS

VF14101

Check the inside of the larger pieces in your box for other

materials packed inside.

When assembling components, place on a non-abrasive

surface (i.e. shipping box) to avoid scratching.

We recommend an area approximately 5’x 8’ for

unobstructed assembling.

You should not need to use excessive force when assembling

components.

VISIT OUR WEBSITE FIRST,

SO WE CAN HELP YOU RIGHT AWAY!

Although great care has been taken to ensure proper packaging

and handling of this product, occasionally problems occur. If you

discover any missing, damaged, or defective parts, please visit

our website to order replacement parts. If you experience any

further trouble with your product, please contact our customer

care department.

parts.nychbrands.com

hmmm@wambamfence.com

704-892-5222

877-778-5733

Customer service agents are available to take calls weekdays from

9am-

5pm EST

If you call outside of business hours, please leave a voicemail.

To help you quickly and accurately, please have reference item

number

VF14101

and the specific part name which can be

found on page 10. It is helpful if you can provide the batch lot

which is a stamped number inside the box.

If you are having problems with the assembly or installation of

this product, we are happy to assist you with the process.

Please

give us a call at

704-892-5222

877-778-5733.

If for some reason you need to return this product, please

allow us to help resolve your issues first. If you still decide to

return the product,

you will need to initiate the return from the

company you originally purchased from.

GENERAL

INFORMATION

MISSING

DAMAGED

PARTS?

NEED

ASSEMBLY

HELP?

NEED TO

RETURN?

IMPORTANT

Summary of Contents for EVEN STEVEN





















Search results

Summary of Contents for EVEN STEVEN

Reviews:

Related manuals for EVEN STEVEN

Brands by name

Popular brands

WamBam EVEN STEVEN, Assembly Instructions Manual

Search results

Summary of Contents for EVEN STEVEN

Reviews:

Related manuals for EVEN STEVEN

Brands by name

Popular brands