2.0 INFORMATION REGARDING SAFETY
2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
9
SEPCOM
®
Vertical
Before starting with installation, a “Safety Plan” must be implemented to safeguard the personnel di
-
rectly involved and those who carry out operations in the surrounding area.
All the laws must be strictly applied, especially those concerning workplace safety.
Before proceeding with installation operations, mark off the work area to prevent access by unauthor
-
ized persons.
The electrical connections must be made in compliance with the standards and laws in force.
The person in charge of making the electrical connections has to ensure that the required standards
and laws are respected before testing.
Do not tamper with the equipment concerned by using any kind of device to obtain performances dif
-
ferent from those designed.
All unauthorized changes can affect the health of people and the integrity of the equipment.
The operators have to exclusively wear protective clothing and have to be equipped with appropriate
individual protection devices for carrying out the operations and as required by the safety and work
accident prevention standards.
Before use, ensure that all the safety devices are installed and that they are working properly.
During operations, prevent access to the work area by unauthorized persons.
Remove all obstacles or sources of danger from the work area.
Climbing, walking or seating on the machine placing and/or improper machine loads on it are strictly
forbidden.
Danger - Warning
Before any intervention on the machine, make sure it is switched off and disconnected from all energy
sources; using suitable devices to lock them, and make sure it cannot be an accidentally reconnected
to prevent it from starting (LockOut - TagOut procedures).
Maintain the equipment concerned in the conditions of utmost efficiency compliant with the mainte
-
nance plan provided by the Manufacturer.
Good maintenance apart from preserving the functional features and essential safety features over
time, will also allow extending the working life of the equipment concerned and achieving the best
possible performance.
Strictly follow the procedures indicated in the Manual, especially those concerning safety.
Ensure that all the safety devices are active and working properly.
Mark off the work area in such a manner as to prevent the access of unauthorized persons.
Replace the worn and damaged components exclusively with original spare parts, whose safety, reli
-
ability and interchangeability have been undoubtedly established.
2.3 Safety prescriptions for installation
2.4 Safety prescriptions for use and operation
2.5 Safety prescriptions for maintenance and replacement of components
