6.0 INFORMATION REGARDING USE
2
SEP.SEPCOM_Vertical.--.M.A4.0722.EN Issue: A4
07.22
34
SEPCOM
®
Vertical
Important
If the equipment is to be used in different conditions and with materials other than the previous applica
-
tion, ensure the “Permitted use” indications are complied with.
Before reusing the separator after a long shut-down, proceed as described below:
1)
check the main screws and bolts
2)
check the oil level
3)
ensure the screws and the screen are clean
4)
start up the separator
6.3 Reuse after long shut-down
To run your machine at its best, the filling level
of the overflow section must range between 1/2
and 2/3 of the full section.
Section view of the overflow
