SPV - SPX
P. 23
REV.0 | 09/2015
2.3
Identification data
To properly indentify the model of the Vibrator, refer to the following information which can be
found on the appropriate plate secured to the main frame (02-02):
• 1: Manufacturer’s Logo
• 2: Manufacturer’s address
• 3: ATEX marking
• 4: model
• 5: serial number
• 6: year of production
• 7: mass
• 8: note
• 9: rotation speed
• 10: centrifugal force
• 11: feeding voltage
• 12: wiring diagram code
• 13: feeding frequency
• 14: number of phases
• 15: size of capacitor
• 16: max input power
• 17: max input current
• 18: starting/nominal current ratio
• 19: thermistor data
• 20: insulation class
• 21: mechanical protection code
• 22: service code
• 23: feeding wire cross section
• 24: feeding cable diameter
• 25: working temperature range
• 26: ATEX certificate number
• 27: max working temperature
• 28: working temperature range
WARNING
Removal or replacement of the original identification plate may impede proper identification of
the machine data, in this respect, Visam s.r.l. disclaims any liability towards third parties in case
of damage to people or things resulting thereof.
2.4
Classification and intended use
In relation to safety issues, the Vibrator falls within the scope of application of Directive 2006/42/CE
(Machinery Directive) as “partly completed machinery” since it is not able, by itself, to guarantee
a well–defined application and is therefore destined to be incorporated to or installed on other
machines, partly completed machines or apparatuses, to achieve a unit regulated by the same
directive (article 2, point “g”)
The Vibrator is an industrial product, designed and developed to be mounted onto vibratory
equipments (sieves, deburring, finishing, etc.), or compacting equipments (moulds, benches, etc).
The use of the Vibrator is allowed only if incorporated into a unit which has been declared
compliant with Directive 2006/42/CE and relevant laws in force, and suitable, in terms of technical
characteristics (see the TDT tables at chapter 13.1) for the type of machine on which it is installed,
according to the indications set out at chapter 7.
WARNING
Visam s.r.l. hereby disclaims any liability for injuries or damage resulting from use or application
of this product contrary to instructions and specifications contained herein.
EN
Summary of Contents for Visam SPV Series
Page 111: ...P 111 ...
Page 129: ...P 129 ...
Page 130: ...P 130 ...
Page 131: ...IT NOTE EN NOTES FR NOTE DE HINWEIS RU ДЛЯ ЗАМЕТОК ...
