STEP 2
INSTALL
ENGLISH
07
INSTALL
ENGLISH
06
Assemble lampshade :
Gently take out the shade metal frames (O) ,(P ) and fabric piece(Q) , fit the
fabric piece (Q) on the metal frames(O) ,(P) with their own hook and loop
fasteners as diagram to get a completed lampshade.
1.First of all, respectively install 3 pcs of pole 1 (G) （please pay attention the flat
end is facing down）on the bottom supporting frame (E) with hexagon screws (D)
by Allen key (C ) provided.
Then put the MDF shelf board 1 (F) on the bottom supporting frame 1 (E) as
diagram and holding a corner until the 4th pole 1 (G) inserts to the bottom
supporting frame (E), lay the MDF shelf board 1 (F) flat, align the holes in the 4th
pole 1 (G) and the bottom supporting frame 1 (E) and fix them with hexagon
screws (D) by Allen key (C) provided.
Please make sure to follow above steps, or the MDF shelf board (F) won't go in.
Gently place the supporting frame 2 (H) on the 4 pole 1(G) and make sure the
top of pole 1 (G) is just hold the inside bracket of the supporting frame 2 (H) as
diagram.
Kindly reminder: during assembly, all screws (D) should not be set too tight at the
beginning for facilitating subsequent overall assembly, after all the assembly is
done, then tighten all hexagon screws (D).
STEP 1
G
E
Q
O
P
B
M
S
Fix the socket (B) with the top
supporting frame (M) together by
wing nut (S), then tighten it.
Carefully unpack all parts from the packaging and place them on a soft /
flat/smooth surface.
1
2
G
E
C
D
