37
2.2
Combustion airflow settings
The settings must always be as shown.
Fuel
Primary
airflow set-
ting
Start damper
setting
Secondary air-
flow setting
Combus-
tion dura-
tion in hrs
Lighting
-
Firewood
Nominal heat
load
approx. 1
Lignite briquettes
Nominal heat
load
approx. 2
Lignite briquettes
Long-term
heating
approx. 12
Not in use: do not add any more
fuel
-
Table 2
3.
Use
3.1
Controls for use and settings
3.1.1
Primary air control
The rate of combustion and therefore the heat delivered by the
stove are determined by the amount of air for combustion air
flowing under the grid. This primary air supply is set using the
performance regulator control.
1 -
Closed
2 -
Firewood
3 -
Lignite
3.1.2
Secondary air control / Airlogic
The secondary air regulator is on the inside of the frame, behind
the fire door. Choose the setting for the fuel.
1 -
Firewood
2 -
Lignite