WP2-8_I
136 / 189
Per disattivare il „BEEP”, bisogna riperetre queste tre operazioni e appare lo schermo seguente:
6. STAND-BY
Dopo l’attivazione della modalitàSTAND-BY e l’arrivo alla temperatura ambiente regolata (*), la
caldaia si spegne e rimane in questo stato.
Entro 5 minuti, quando la temperatura supera di 2°C alla temperatura ambiente, la caldaia
passa alla modalità STAND-BY.
Lo statoSTAND-BY è indicato dall’accensione di un LED (L2).
In questa modalità la caldaia funziona ma si accende attivamente quando la temperatura
regolata diminuisce di 2oC e rimane in questo stato per almeno 10 minuti.
(*) quando la temperatura ambiente è attiva
6.1. COME SPEGNERE LA CALDAIA
Si può spegnere la caldaia in qualsiasi momento con il tasto P2
(ON/OFF)
.
Dopo aver premuto il tasto, il LED verde lampeggia fino all’arrivo allo stato spento (OFF).
STATO SPENTO
Dopo aver premuto il tasto P2 (ON/OFF), la caldaia passa allo stato SWITCH OFF e comincia a
raffreddare. Il ventilatore di gas passa a una potenza maggiore per accelerare la bruciature di
pellet nella camera di combustione.
La caldaia passa allo stato seguente solamente se la temperatura del gas d’evacuazione non
supera il valore di 70oC.
RAFFREDDAMENTO
Il ventilatore di gas d’eliminazione rimane in stato acceso durante 300 secondi.
In seguito, il ventilatore si spegne completamente (il LED L2 si trova nello stato OFF).
INTERRUZIONE D’ELETTRICITA
In caso d’interruzione d’elettricità che non supera 10 secondi, la caldaia funziona normalmente.
Se la caldaia si trova nello stato STAND-BY, ritorna in questo stato.
Se la caldaia si trova in altra modalità, in caso d’interruzione d’elettricità, la caldaia si spegne.