WP2-8_GB
56 / 189
5.2. SETTING THE TIMER
See the graph below:
The graph shows all the days of the week. The DAY field is split up into 24 periods, each of
these periods lasts for 1 hour (1, 2, …. 24). Each of these hours is divided into two periods of 30
minutes.
Selection of the functions and hour ranges
By pressing the P5 and P6 keys, symbols can be reached in both directions (hours, days of the
week, programming symbols of "copy, add, exit").
Here, the desired ranges can be selected, such as the 7:00 time (see the graph).
TEMPERATURNIVEAU
TEMPERATURE LEVEL -
TEMPERATURE LEVEL
KOMFORT - COMFORT
NORMAL - NORMAL
ECO
-
ECONOMY
TERMPERATURNIVEAU -
TEMPERATURE LEVEL
By pressing the P4 (SET) key continuously, set the black column to the desired height (0 "AUS",
ECO, NORMAL, COMFORT).
For instance, the boiler switches off at 6:00 (OFF), turns on at 6:30 in ECO mode, at 7:00 it start
to operate on the NORMAL performance level, while at 7:30 it works in COMFORT mode.
The times can be set with the use of the P5 and P6 keys.
Modification of the days of the week
The days of the week can be set with the use of key P5 and P6. The days of the week can be
set by pressing the P4 (SET) key. The days of the week appears one after the other.
After selecting the day, the times can be set with the use of the P5 and P6 key in the above-
specified order.
For each day, multiple switching on and off cycles, as well as various temperature values can
be programmed.
The following page describes how to copy the settings of a specific day to another day.
