Open buckle
Pitching
Cover the inner tent with fly sheet,
secure the fly to the leg pole with
hook and loop tapes and to the corners
with buckles.
Folding
To assemble the awning use the steel
poles and guy ropes provided. Pass the
pole spigots through the eyelets on each
corner of the door. Peg down with guy
ropes to secure the poles.
Then fold the poles together and tie it up.
Take off the flysheet and remove the pegs from
the ground.
Take out inner
tent and lay it on the ground.
same for all 4 corners.
section will slide into the bottom section. Do the
Press the button on the leg pole, the upper pole
Do the same for all 4 corners.
Unbutton the buckles, loosen the webbing in bottom.
Close buckle
out inner
nd lay it on the ground
“click”
ck”
Pull the tent upright and slide the leg
poles outwards until you hear a click.
Locate the buckle at the bottom of
the pole and click together to secure.
Secure the bottom corners of the
tent to the ground by inserting the
steel pegs
