29
GB
!
!
•
Spread the filament over evenly over the main burner.
•
Place the embers on the bottom of the appliance but make sure they don’t lay on the main burner.
•
Place the logs as exactly as shown on the images.
•
Re-install the glass and decorative frame.
Be sure not to touch the cleaned glass with your fingers when you replace the pane. Finger marks burn
in the glass.
Do not forget to replace the door correctly and close it before lighting the hearth.
Make sure there is no log or stone in front of the pilot as this may prevent the main burner from
ignition whereby unburned gas may accumulate in the stove. If this happens, you must extinguish the
pilot and notify your installer.
You must not add extra ceramic (wood) logs or any other material to the log set. The usage of grains is
prohibited (LPG). The stove may not work properly and become damaged beyond repair. Ceramic log
sets may be replaced only by the same kind of WANDERS logs.
!
Summary of Contents for STEALTH - SCHEMATICS
Page 61: ...61...
