5
user instructions
WAN_SYMAX_EN_v.1.1_112016
Modes of operation
1 2
ON
AM
PM
OFF
M
Thermostatic mode
The room temperature is measured
and compared to the set temperature.
The fl ame height is the automatically
adjusted to achieve the set temperature.
ON
AM
PM
OFF
K
Program mode
Programs 1 and 2. Each program can be
programmed to go on and off at specifi c
times at a set temperature.
AM
N
Ecowave mode
The fl ame height modulates between
high and low. If the room temperature
is lower than the set temperature, the
fl ame height stays on high for a longer
period of time. If the room temperature
is higher than the set temperature, the
fl ame height stays on low for a longer
period of time. One cycle lasts approx.
20 minutes.
Thermostatic mode
ON:
Press the
E
button. The
M
symbol is
displayed, the preset temperature is
displayed briefly and then the room
temperature is displayed.
OFF:
1. Press the
E
button.
2. Press the
A
or
B
buttons to enter the
manual mode.
3. Press the
F
button to enter the
program mode.
4. Press the
H
button to enter the eco
mode.
SETTING:
1. Press the
E
button and hold until the
M
symbol appears. The temperature
flashes.
2. To adjust the set temperature press
the
A
or
B
buttons.
3. To confirm press the
E
button or wait.
ON
AM
PM
OFF
ON
AM
PM
OFF
Program mode
ON
AM
PM
OFF
ON:
Press the
F
button.
K
,
1
or
2
,
ON
or
OFF
will be displayed.
1 2
ON
AM
PM
OFF
OFF:
1. Press
F
or
A
or
B
to enter the Manual
mode.
2. Press the
E
button to enter the
Thermostatic mode.
3. Press the
H
button to enter the
Ecowave mode.
NOTE:
The set temperature for Thermostatic mode is the temperature for
the on time in Program mode. Changing the Rhermostatic mode set
temperature also changes the on time temperature in Program mode.
Default settings:
ON TIME (Thermostatic): 21°C (70°F)
OFF TIME TEMPERATURE: "
--
" (pilot flame only)
ON
AM
PM
OFF
TEMPERATURE SETTING:
1. Press the
F
button and hold until
K
fl ashes.
ON
and the set temperature
is displayed (setting thermostatic
mode).
2. To continue press
F
or wait.
K
,
OFF
is displayed. Temperature fl ashes
3. Select the off
temperature by
pressing
A
or
B
.
4. Press the
F
button to confi rm.
NOTE:
The on (thermostatic) and off set temperatures are the same for
each day.
ON
AM
PM
OFF
DAY SETTING:
5.
ALL
fl ashes. Press
A
or
B
to choose
between
ALL
,
SAÚSU
,
¡
,
™
,
£
,
¢
,
∞
,
§
,
¶
.
6. Press the
F
button to confi rm.
