Operating Instructions GS-1 Guide Fence System
CAUTION
Always
unplug
your machine before making a set up.
CAUTION
Beware
of
pinching
your finger between the stock and flex
guide as you guide the stock into the machine.
The flex guide and the fence positions may be interchanged from one side to the other depending
on your need at the time. Generally you would want the flex guide on the highest side of the
molding to protect it from being cut into by the long side of the knife. This will preserve your
flex guide, giving you the best flex and smoothest surface for running your stock
.
Install your molding knives and orient one knife
toward the machine sub plate. Lay a 12”
sample piece of stock on your sub plate and
align it with the knife profile.
Crank the machine head down to hold your stock.
Do not let the knife dig into the stock.
Push the fence up against your stock and
tighten the guide locking handles.
14