SPECIFICATIONS
ACCESSORIES
MOTOR
1.5HP
ELLIPTICAL JIG
EJ-92
RPM
6960
FEED RATE
0-19FPM
CRANK EXTENSION
54-306
MAX PROFILE DEPTH
¾”
MAX PROFILE WIDTH
6 ¾”
PLANING WIDTH
7”
MIN STOCK LENGTH
9”
MIN STOCK THICKNESS
¼”
MAX STOCK THICKNESS
8”
WORKING HEIGHT
35”
OVERALL HEIGHT
50”
OVERALL WIDTH
22”
OVERALL LENGTH
28”
BOXED WEIGHT
208#
SAFETY RULES
Your W&H Molder has been designed for maximum safety, however, as with all power tools; there is a
possibility of incident or injury to the operator. Therefore,
it is imperative that this manual is completely read
and understood before using
.
Use your W&H Molder with respect and caution. Following stated and inherent safety precautions will
considerably lessen the possibility of personal injury. If normal safety measures are not taken or are overlooked,
the possibility of incident rises tremendously. These safety measures are simple to follow, and the injuries that
could happen are not worth the few minutes saved by ignoring safety.
The W&H Molder was designed for specific applications.
Do not modify
or use the machine for any purpose
other than what this manual describes as its capabilities. Substituting a motor with a horsepower rating over
2HP constitutes a modification. Any modifications or improper use to the Molder-Planer may result in personal
injury, and will void the warranty. Please contact us if you are unsure about safety protocol before using the
machine.
2
