23
Note (*) This option is available only if a compatible printer is connected to the sterilizer.
List of the MENU options
Note (**) The first time you access this function, an activation code must be entered
MENU
SUB-MENU
WHAT IT DOES
Formats your USB pen drive in case you want to erase all the data on it.
(**)
(*)
Select the printer model.
Calibrate (Adjusts the label printer to the edge of the label).
Prints a Test label
Set the horizontal (X) and vertical (Y) offset values in order to have the printout duly centred in
the label area.
Selects a printer connected to another sterilizer (connected via local network). The IP address of
the other sterilizer will be requested.
Select the printer model connected to the sterilizer.
Permits entering the codes issued by the manufacturer, to activate special functions
Displays the status of consumables
(number of cycles executed and number of cycles left).
Resets the counter to zero after replacing a consumable. See the
MAINTENANCE section for details.
Plays a video showing how to
replace the component.
Displays the status of the 4000-cycle maintenance (number of cycles executed and the residual cycles left) of
consumables.
The maintenance must be carried out by an authorized service tecnician. See the MAINTENANCE section for details.
View the system information (model, serial number, cycle counter, software release, etc.)
During a cycle: view the cycle parameters (time, phase, pressure, temperature, etc.).
