Label printing options
AUTOMATIC PRINTING: if activated, a fixed number of labels will be printed after a successful
(*) sterilization cycle. The number of labels may be set below in the same screen.
MANUAL PRINTING: if activated, when starting a sterilization cycle a screen will appear,
asking the number of labels needed.
DISABLED: if activated, disables the printing of labels.
STORAGE TIME: sets the maximum storage time (in weeks). This value is used to calculate
the expiry date that will be printed on the labels.
If this value is set to zero, no expiring date is printed.
(*) NOTE: The labels are printed only after the user has identified him/herself (with
password if required) and the load has been checked and released, if these options have
been enabled by the ADMINISTRATOR.
For your safety and the safety of your patients
Use a storage time according to the recommendations of the manufacturers
of the containers/packaging used, and in conformity with applicable norms
and rules.
For a typical label layout, see ANNEX 9.
NUMBER OF LABELS sets the number of labels to be printed automatically.
36
To set the label printer options, select MENU – TRACEABILITY – LABEL PRINTER (This menu is available only if a label printer is properly configured).
