Water tanks
Filling the clean water tank
•
Switch the sterilizer ON
•
Slide the tank cover to the right to access the clean water tank inlet.
•
Remove the cap from the tank inlet;
•
Insert the funnel and fill the water tank with app. 3.5 litres of distilled or demineralized water;
•
Once the clean water tank is almost full, an audible tone will sound; stop filling;
•
Place the cap to close the tank;
•
Slide the tank cover back into its original position.
11
Draining the used and clean water tank
•
Open the service door at the front of the sterilizer.
•
Put a container (4 litres min) below the sterilizer and insert into it the free end of the drain tube.
•
Insert the drain tube into the right connector (grey) for the used water, or into the left connector
(blue) for the clean water.
•
Let the water flow from the tank completely.
•
Press the push-button on top of the quick connector to dislodge the drain tube.
Do not use tap water to fill the clean water tank
Use only distilled or demineralized water as described in ANNEX 4.
Do not add any chemical / additive to the water.
Clean water drain (blue)
Used water drain (grey)
