Accessories
Cycle report printer (S'Print) - part n. 19721108
S'Print is a compact, reliable and easy-to-use printer that can be connected directly to the serial port located in
the rear of the sterilizer,.
S'Print can be easily managed from the sterilizer control panel (See Chapter 5 - Programming) in order to:
- Print cycle data reports (see ANNEX 5 “Example of a cycle data report”) at the end of each cycle either in
automatic or manual print mode;
- Print a report of any cycle stored in the sterilizer memory.
Printouts are very durable and can be stored in the file records for years.
63
Permanent drain kit - part n. X051052x
This kit is mounted to continuously drain the used water tank, thus manual tank draining is no longer
necessary.
The kit needs to be mounted by an authorized service technician.
Water feed system - part n. X051110x
Mount this kit in the sterilizer if you want to connect a water filtration system to automatically fill
the clean water tank with demineralized water and drain the used water tank continuously.
The kit needs to be mounted by an authorized service technician.
Water quality provided by the filtration system has to comply with ANNEX 3. The water supply
pressure must be between 2 and 8,6 bar.
Drain tube kit with fittings - part n. A812110x
Use this kit to connect the sterilizer permanent drain to a drain pipe.
