Installation
15
Step
Description
Image
5
Connect the black tube in the fitting at the Water Block
®
valve outlet and in the fitting “IN” of the Osmo.
These are quick-connector fittings: insert the tube
until it hits the back of the fitting and pull slightly to
check it is correctly inserted.
To take the tube out of the fitting, press the fitting
ring with your fingers and pull out the tube.
Note
To allow the complete installation of the Osmo, the
white tube needs to be cut into several pieces
.
6
Connect the white tube in the fitting “TANK” of the
Osmo.
This is a quick-connector fitting: insert the tube until
it hits the back of the fitting and pull slightly to check
it is correctly inserted.
To take the tube out of the fitting, press the fitting
ring with your fingers and pull out the tube.
