50956 AEN Rev. 000 / 31.01.2020
Subject to alterations
Additional information
Switching control between PL-40 and PB-530
W&H Dentalwerk Bürmoos GmbH t
+ 43 6274 6236-0
Ignaz-Glaser-Straße 53, Postfach 1 f
+ 43 6274 6236-55
5111 Bürmoos, Austria
office@wh.com wh.com
PL-40 handpiece drive and PB-530 control unit are paired with one foot control
Controlling PB-530
Controlling PL-40
Page 2 of 2
Switch off PL-40
Press ON/OFF button for
2 seconds
>
If the handpiece drive is not used for longer
than 4 minutes, it returns to standby mode
automatically
Actuate foot control
>
PB-530 control unit is active
with the
set power
Switch on PL-40
Press ON/OFF button
>
Charging cable must be disconnected
Actuate foot control for variable
speed control
>
PL-40 handpiece drive is active
