13
W&T
Connections and Displays
Subject to error and alteration
2.3 Supply voltage
Depending on the hardware version, the LAN-Modems are
supplied either with a regulated +5V or with an AC/DC
voltage of between 12V and 24V.
2.3.1 5V
supply voltage (58210, 58220)
The supply voltage for models 58210 and 58220 is
brought in through the power terminal located on the
underside of the housing. The supply voltage is 5V +/-
5%. The current consumption of the various models can
be found in the technical appendix.
2.3.2 12–24V
supply voltage (58611, 58620)
The supply voltage for models 58610 and 58620 can also
be brought in through the power terminal for jack plugs
located on the housing underside. Both DC voltage of any
polarity as well as AC voltage may be used. Polarity
versal protection results in the following maximum and
minimum values for the supply voltage:
AC:
9V
eff
(-5%) – 24V
eff
(+5%)
DC:
12V (-5%) – 34V (+5%)
The current consumption of the various models can be found
in the technical appendix.
Summary of Contents for 58210
