15
W&T
RS422 > Centronics Interface, 4+4 KByte, Model 62008
Subject to error and alteration
Signal
Pin#
Data Out A (-)
10
Data In A (-)
11
Signal GND
14
Hands. Out A (-)
15
Hands. Out B (+)
16
Data Out B (+)
22
Data In B (+)
23
Connector and pinouts
The RS422 connection on the interface is configured as a 25-
pin SUB-D female connector. The pinouts for this connector
must in general be adapted to the pinouts of the data source
when installing the device. This can be done using an adapter
cable or by modifying the interface plug assignments. The
interface pin assignments are shown in the following table.
