19
W&T
RS422 > Centronics Interface, 1+1 KByte, Model 62009
Subject to error and alteration
Connectors and pinouts
The RS422 connection on the interface is configured as a 25-
pin SUB-D female connector. The pinouts for this connector
must in general be adapted to the pinouts of the data source
when installing the device.
This can be done using an adapter cable or by modifying the
interface plug assignments. The interface pin assignments are
shown in the following table.
Signal
Pin#
Data Out A (-)
10
Data In A (-)
11
Signal GND
14
Hands. Out A (-)
15
Hands. Out B (+)
16
Data Out B (+)
22
Data In B (+)
23