- 5 -
Speedometer and indicator (Fig 3)
⑴
engine speed
⑵
LH turning signal light
⑶
main beam indicator
⑷
odometer
⑸
speedometer
⑹
RH turning signal light
⑺
fuel meter
⑻
engine oil lower light
Ignition switch
（
Fig4
）
(1) On (
)-when the switch turn to this position,
Start engine and do not pull out the key.
(2) Off (
) When the switch turn to this position,
Start engine power off and take out the key.
(3)Lock
(
)
When the switch turns to lock position
(
)
,
Take out the key .do not do any turning operation
And do not start engine and light.
Notice :If the engine is idling speed for a long time in the hot climate,
It will appear too hot phenomenon , Must close engine.
Fig 4
Fig 3
- 6 -
FUELMETER 3 (Fig 5)
Fuel meter (7) show the approx
remainder of fule. When the hand point
to (F), it indicates Full tank of 5L.
When the hand at red section it indicates
the remainder of fule is 1.8L.
•
Starting switch
（
2
）（
Fig 6
）
Press this button to start engine
。
Headlamp switch (1).
（
Fig.6
）
There are 3 choices for Headlight Switch:
“
”
、
“
”
and
“
•
”
:Headlamp, position lights, taillight and meter light turn on
。
：
position lights and meter light turn on.
•
：
Headlamp, position lights, taillight and meter light turn off
。
FIG 5
Fig.6
Summary of Contents for WY50QT-28A
Page 20: ...35...
