background image

21

190-999 Rev G

21

Limited Warranty

Wanner Engineering, Inc. (“Wanner”) extends to the original 

purchaser of equipment supplied or manufactured by 

Wanner and bearing its name, a limited one-year warranty 

from the date of purchase against defects in material or 

workmanship, under normal use and service, and provided 

the equipment is installed, operated and maintained in 

accordance with instructions supplied by Wanner. Wanner 

will repair or replace, at its option, defective parts without 

charge if: (a) you provide written notice of any defect within 

thirty (30) days from the discovery of the defect; (b) the claim 

is received by Wanner before the expiration of the warranty 

period; and (c) such parts are returned with transportation 

charges  prepaid  to  Wanner  Engineering,  Inc.,  1204 

Chestnut Avenue, Minneapolis, Minnesota 55403. A return 

goods authorization must be received prior to the return of 

the defective part. No allowance will be made for repairs 

undertaken without Wanner written consent or approval.
Not  withstanding  anything  to  the  contrary,  this  warranty 

does not cover:

1.  Electric  motors  (if  applicable)  not  manufactured  by 

Wanner. The warranties, if any, on such equipment are 

assigned to you by Wanner (without recourse) at the 

time of purchase.

2.  Normal wear and/or damage caused by or related to 

abrasion, corrosion, abuse, negligence, accident, faulty 

installation or tampering which impairs normal operation.

3.  Transportation costs.

This limited warranty is exclusive, and is in lieu of any other 

warranties  (oral,  express,  implied  or  statutory)  including, 

but  not  limited  to,  implied  warranties  of  merchantability 

and  fitness  for  a  particular  purpose;  warranties  of  non-

infringement; warranties arising from course of dealing or 

usage of trade or any other matter. Any descriptions of the 

equipment,  drawings,  specifications,  and  any  samples, 

models, bulletins, or similar material used in connection 

with  the  sale  of  equipment  are  for  the  sole  purpose  of 

identifying the equipment and are not to be construed as 

an  express  warranty  that  the  equipment  will  conform  to 

such description.  Any field advisory or installation support 

is advisory only. Every form of liability for direct, special, 

incidental or consequential damages or loss is expressly 

excluded and denied. All liability of Wanner shall terminate 

one (1) year from the date of purchase of the equipment.

MT8 - Warranty

Summary of Contents for Hydra-Cell MT8























Reviews: