http://www.wansview.com
figure 11.
Figure 11
4.3.2 Third Party DDNS
User can also use third part DDNS, such as
www.dyndns.com
User must apply a free
domain name from this website and fill the info into the below blanks (Figure 12) and
save the settings. Then the domain name can be used.
Figure 12
Note: Using the third party domain name, if the http port is not 80, the port number should
be adding to the domain name with colon. Example:
http://btest.dyndns.biz:81
.
While manufacturer DDNS is no need to add PORT.
5 Other
Settings
5.1 Network Setting
5.1.1 Basic Network Setting
The user can also enter the Basic Network Settings to set the IP address except using
the search software. See below Figure 13.
Figure 13
5.1.2 WIFI
Setting
If the device is with WIFI, enter the Wireless LAN Setting, just as below Figure 14 shown,
click the “Scan” button, it will show you all the wireless networks detected in the Wireless
Network List column. Select one of them and tick “Using Wireless Lan”, then the relevant
12
