HD IP Camera Q3(720P)/Q3S(1080P)
18
2.5 Alarm Setting
The camera is mostly for live video, what we achieve is to make the video more clear and
easy set up. it is not a professional security camera, the motion detection is only an
add-on feature. So the alarm notification will not be very accurate.
But if you want the motion detection works accurately, you may connect the camera to
some professional security software like: Blue Iris, iSpy or Sighthound, the camera alert
works great on them.
Follow the below steps to set up alarm.
Alarm Deployment
IO Detection:
this is for camera that can connect external source of alert device. The
Q3/Q3S is not available.
Sensor Type:
For external source of alert device. The external sensor can be always open
or always close.
Motion Detection:
Enable Motion Detection, user can set up camera with motion alarm
Motion Detection Sensitivity:
User can choose Low/Middle/High sensitivity according to
needs.
Voice Detection:
Enable Voice Detection, user can set up camera with voice alarm
Voice Detection Sensitivity:
User can choose Low/Middle/High sensitivity according to
needs.
Trigger Alone:
The alarm will be triggered for any kind of active alarm
event(Motion/Voice/IO)
Trigger Link:
The alarm will be triggered for multiple detection at the same
time(Motion/Voice/IO).
Alarm Action:
Save Picture to Email:
When an alarm is detected, the camera will send pictures to the
email box. Users can set up to 2 recipients.
Click Mail Setting to setup the email. Check your email provider for SMTP Server and
Port.
