3 of 3
12
1
2
Install Reflector (C) by inserting between
host troffer and T-bar. Swing Reflector
upwards.
Secure Reflector by inserting 1/4-turn
fastener (supplied) and rotating 90°.
Remove protective packaging from LED
modules. Place Lens Diffuser (D) onto
retrofit kit by squeezing sides of Lens
Diffuser and inserting edges into grooves
of Gear Tray and Reflector. Lens may
need to be adjusted by squeezing sides
or pressing the face of the lens.
Ground Connection
OPTION A:
Securely fasten ground screw lead from
Gear Tray (B) to host troffer if host troffer
is grounded.
B
A
Conduit (Supply)
Retrofit Kit
Ground
Connection
LED Driver
Electrical Connection (AC Mains)
Follow instructions and wiring diagram on Page 1 to
connect AC mains to Gear Tray input leads. Retrofit
kit comes equipped with quick disconnect. Hide
wires behind Gear Tray. Ensure leads do not hang
out of Gear Tray to avoid electrical wiring being
clamped between metal parts.
LED Driver
AC Mains
Retrofit Kit
Host Troffer
OPTION B:
Connect ground from Gear Tray (B) to
supply ground lead from conduit.
11
13
14
10
LTR
™
Series
