background image

Warranty/replacement parts/dismantling 

[B867400_1] - EN / 20.07.11 

Page 12 of 16 

Subject to change without notice. 

5

 

Warranty 

Subject to the statutory period of limitation for warranty 
claims. This requires regular maintenance. The warranty 
does not include wear parts or optical changes in line 
with the type of material used (e.g. bleaching of surfaces 
caused by UV rays). 

 

Wear parts are 

 

Bearing 

 

Pusher in the guide rails (left and right) 

 

Gear drive 

 

Crank, crank rod 

 

6

 

Spare parts/repairs 

 

 

CAUTION 

Personal injury or property damage resulting 
from inappropriate repairs! 

 

The product should only be repaired by a 
qualified specialist. 

 

To ensure that your product operates properly on a 
continuous basis and to avoid changing its approved 
status, use WAREMA spare parts only. Contact a 
qualified specialist for further information if necessary. 

7

 

Dismantling/disposal 

 

CAUTION 

Personal injury or property damage from 
incorrect dismantling! 

 

The product should only be dismantled by 
a qualified specialist. 

 

Dismantling and re-installation of the product 

must

 be 

undertaken by a qualified specialist in accordance with 
current guidelines and standards. Be sure to ask the 
manufacturer for any missing documents before beginning 
to dismantle or reinstall the product. 

Should the product no longer be required, ensure that it is 
disposed of correctly in accordance with the relevant 
regulations. 

 

Procedure for disposal 

 

Components identified in this manner should 
not be disposed of with the household trash. 

 
 

Summary of Contents for C 80 A8

















Reviews: