Operation
Slat roof L70
INFO
The tilting process in slat roof L70 is executed after the product is fully extended (lower limit position). The motors
interlock mutually, which prevents product damage from occurring. As soon as the slats are fully extended, the slats can
be tilted or are tilted automatically.
Before they are retracted, the slats are always tilted to the vertical position (90°).
INFO
Select the right channel for the product on the hand-held transmitter.
The exact description of the hand-held transmitter can be found in the accompanying instructions for the hand-held
transmitter.
Ext
ending t
he slats and
tilting t
hem brief
ly
Press and hold
the DOWN button.
1
2
The slats move to the lower limit position and
then tilt automatically.
Oper
ating Lamax
a L70
Slats v
er
tical
and r
etr
acting t
hem
Press and hold
the UP button.
1
2
The slats automatically tilt to the 90° position
and move to the upper limit position.
2029839 [Rev. 9 - en]/2021-10-11
Page 15 | 32
