Operation
3.1
Key assignment of slat roof hand-held transmitter(individual unit)
Equipment
Number of channels
Drive – tilting (L60) slat roof/tilting and moving (L70) slat roof
1-channel
Direct LED lighting in beam (optional)
1
1-channel
Indirect LED lighting in beam (optional)
1
1-channel
LED lighting in pole (1–4 fields) (optional)
1
1-channel
Radiant heater field 1 (optional)
1
1-channel
Radiant heater field 3 (optional)
1
1-channel
Integrated awning with easyZIP guidance (optional)
2
1 channel/awning
1
The channel is only occupied if the component was contained in the slat roof order.
2
The integrated awning with easyZIP guidance is always programmed for the WMS network after it has been installed.
WMS Hand-held transmitter plus
INFO
When fully equipped, not all components can be operated with a hand-held transmitter. The hand-held transmitter has
6 channels.
A
Channel
no.
Assignment (standard)
1
Assignment (customer-specific)
1
Drive
2
LED beam direct
3
LED beam indirect
4
LED pole
5
Radiant heater field 1
6
Radiant heater field 3
Tab. 6:
Standard assignment WMS hand-held transmitter plus (settings at the factory)
1
The channels are assigned at the factory if all specified components are present upon
delivery.
The preassigned channel changes if an additional accessory listed before it is not
present.
Channel
no.
2
Assignment (standard)
Assignment (customer-specific)
3
Awning
Direction
Awning
Direction
Awning
Direction
Awning
Direction
Tab. 7:
Assignment of WMS Hand-held transmitter plus (taught on-site)
2
Enter the number of the channel.
3
For better identification, add a clearly identifiable location name, e. g. toward house.
2029839 [Rev. 9 - en]/2021-10-11
Page 9 | 32
