Installation and care
instructions
Insect screen pleated blind
For qualified technicians only
To be handed over to the opera-
tor.
Please keep for future use.
Valid from 19 April 2017
2021216 [Rev. 2 - en]/2017-04-19
Page 1 | 8
Installation and care
instructions
Insect screen pleated blind
For qualified technicians only
To be handed over to the opera-
tor.
Please keep for future use.
Valid from 19 April 2017
2021216 [Rev. 2 - en]/2017-04-19
Page 1 | 8
1
Safety and product information
Warnings are marked in the instructions with this
symbol.
Read through the product instructions before
use.
Observe all safety and setting instructions.
The basic safety instructions
can be viewed under
www.warema.de/Sicherheitshinweise
Target group
These instructions are intended for use by persons who
install, operate, care for and/or maintain the product.
Persons installing the product must be familiar with the
following areas: occupational safety, accident prevention
regulations, working with ladders, usage of fixing materials,
and the commissioning and operation of the product.
If the fitter lacks any one of these qualifications, the work
must be carried out by a specialist fitting company.
Contents
These instructions are an integral part of the following
product:
Insect screen pleated blind P1.Q.xx (one-wing) and P2.Q.xx
(two-wing)
Intended use
The following details apply to the following product: Insect
screen pleated blind P1.Q.xx (one-wing) and P2.Q.xx (two-
wing)
The product is a horizontally movable insect screen pleated
blind for outdoor use.
The product does not offer fall protection at windows. The
necessary safety measures must be provided as legally
stipulated.
The intended use also includes observing these instructions
and adhering to the service requirements they describe.
Parts description
Designation
Description
P1.Q.20
Insect screen pleated blind without
mounting frame
P1.Q.21
Insect screen pleated blind with 4-
sided mounting frame
P1.Q.22
Insect screen pleated blind with 3-
sided mounting frame (open at the
bottom)
P1.Q.23
Insect screen pleated blind with lat-
eral mounting frame profiles
P2.Q.xx
Insect screen pleated blind, two-wing
(for model, see P1.Q.xx)
Tab. 1:
Overview of models
1
2
3
4
5
1
Fabric package with
handle rail and end
profile
4
End profile, opposite
side
2
Ceiling profile
5
Base profile
3
Guide rail, top
Fig. 1:
Parts overview of insect screen pleated blind
P1.Q.20
