890362_b•en•21.03.2011
We reserve the right to carry out improvements
12
WAREMA Quatronic dialog
®
Operating instructions
4.2 isplay and operating
elements
The WAREMA Quatronic dialog is characterised by its elegant design and
its particularly user-friendly user interface. The presentation of all parameters
and readings is provided in plain text in a clearly arranged display window,
referred to simply as
Display
below. The resolution is two times 40 charac-
ters and the illumination ensures good readability through a high-contrast
display.
The function of the operating buttons is menu-dependent and is shown on
the display directly above each button.
1234567890123456789012345678901234567890
1234567890123456789012345678901234567890
Fig. 2
The operating elements and interfaces of the WAREMA Quatronic dialog
a
Display:
The illuminated display informs you on everything you can read and set on
the WAREMA Quatronic dialog. For example, you can read current measured
values of outside brightness, outside temperature, the current time and much
more.
b
disp/prog
button:
Display/programming: By pressing this button you can change between the
menus of the Quatronic dialog. If the button is pressed for at least 5 sec-
onds, the Quatronic dialog changes to the programming mode.
c
arrow buttons:
Raises the sun shading products at facades 1-4.
In the programming mode, these buttons can be used to navigate to sub-
menus or adjust the settings.
d
arrow buttons:
Lowers the sun shading products at facades 1-4.
In the programming mode, these buttons can be used to navigate to the sub-
menus or adjust the settings.
e
info
button:
Opens the available help texts (see
Chapter 9 on page 66
).
f
Contrast setting:
The Quatronic dialog display contrast is adjusted to the optimal setting at the
factory. However, you can later adjust the contrast to your personal require-
ments. Adjust the potentiometer behind the opening using a cross-head
screwdriver (size 0) to the desired contrast.
Basics
