890362_b•en•21.03.2011
We reserve the right to carry out improvements
20
WAREMA Quatronic dialog
®
Operating instructions
5.1.3 Position and ause
Position: Lower
Upper
Cause: ManOp Wind Rain Sun
Upper line:
Current position of the sun shading product or move command
for the respective facade:
Display
Meaning
Upper
Sun shading product is located in the upper limit position
Lower
Sun shading product is located in the lower limit position
?
Sun shading product in an unknown position, e.g. the unit was
stopped while it was moving
Move command: sun shading product moves up
Move command: sun shading product moves down
WARAIAG
This display does not indicate that the sun shading products are actually
at the upper and lower limit positions. It merely displays the move
command that was last issued.
Lower line:
Indicates what triggered the last move command. Possible
causes are:
Display
Meaning
Wind
Wind monitoring safety function
Ice
Ice monitoring safety function
Rain
Rain monitoring safety function
ManOp
Manual operation
Timer
Time switch comfort function
Rel.H
Relative humidity comfort function
Temp
Inside/outside temperature comfort function
Sun
Sun/cloud comfort function
Da/Du
Dawn/dusk comfort function
Cause flashes
Sun shading product is moving
Cause is displayed
continuously
Sun shading product is in limit position
NOTE
If a move command is triggered, the display automatically changes to this
menu and continues to be displayed.
Exceptions:
The "Position and Cause" display does not appear during programming.
If the display mode is set to change automatically
(see
Chapter 5.1.7 on page 22
), the display changes 8 seconds after a move
command is triggered.
Menus
isplay menus
