890362_b•en•21.03.2011
We reserve the right to carry out improvements
30
WAREMA Quatronic dialog
®
Operating instructions
6.1.4 Wind test
If the wind sensor or a line is damaged, the Quatronic dialog cannot evalu-
ate wind readings and the wind monitoring function is not active. To prevent
damage to your sun shading products in this situation, you can activate the
"wind test".
If the Quatronic dialog does not receive a signal from the wind sensor in 99
hours, it is assumed that the sensor is defective. All sun shading products for
which the wind test is active are raised. The following message appears in
the display of the Quatronic dialog:
ATTENTION: No signal from wind sensors
in last 99h. Please check it!
WARAIAG
During this display, the comfort functions are not activated. The local
operating elements are not functional. The unit becomes functional again
after an up or down button is pressed at the central control unit.
WARAIAG
Note that if this occurs in your absence (on holiday,...), the sun
shading products will no longer be moved automatically.
Safety functions
Wind monitor
