890362_b•en•21.03.2011
We reserve the right to carry out improvements
56
WAREMA Quatronic dialog
®
Operating instructions
7.6.3 Manual operation
Switching the comfort functions on/off manually
In some cases, such as in the following, you may only want to temporarily
switch off the comfort functions:
You do not want the sun shading products to move while you are away on
holiday.
You do not want the articulated arm awning to move up at dusk during a gar-
den party.
You do not want the sun shading products to move down while you are
cleaning the windows.
etc.
In these cases, you can comfortably switch off all comfort functions globally
at the Quatronic dialogue without having to change your other settings. You
have two possibilities:
1.
Switch off the comfort functions in the
Comfort timer settings: Manual
menu item.
Select (as described in
Chapter 7.6.1 on page 54
) the
Manual
menu item in
the
Comfort timer
menu.
Comfort timer MoFrE SaSuE Manual
settings: MoFrD SaSuD
The
Comfort functions
menu opens.
Comfort functions ON OFF OFF OFF
ENABLE Mon-Fri: CH1 CH2 CH3 CH4
Using the
buttons, you can now switch on or off the comfort functions on
the respective facade.
2.
Switch off the comfort functions in the
Comfort timer
display (see the "Dis-
plays" chapter). (Can be reached without a password)
NOTE
The safety functions cannot be switched off by the comfort timer nor manu-
ally via "Comfort functions OFF".
omfort functions
omfort timer
