890362_b•en•21.03.2011
We reserve the right to carry out improvements
57
8 General parameters
8.1 Product
The various product types that can be controlled with the
WAREMA Quatronic dialog are pre-parameterised. The factory settings can
be found in
Chapter 16 on page 70
. An overview of the controllable products
is provided here:
Product type
Conceptual drawing
Information in display
Articulated arm awning
Articulated
Conservatory awning
Conservatory
External venetian blind
External
venetianblind
Roller shutter
Rollershutter
Pleated blind
Pleatedblind
Fig. 5
Sun shading products
When the Quatronic dialog went through the automatic commissioning rou-
tine, it set the products on all facades to the articulated arm awning for safety
reasons. To adapt the Quatronic dialog to your needs, you can now set up
the products (roller shutters, external venetian blinds, pleated blinds, awn-
ings) you have on the individual facades.
Each of these products has different properties. Therefore, they respond dif-
ferently to wind, require different turn or run times, or may be located indoors,
thus not requiring rain or wind protection. To save you from having to enter
all of the individual product-specific settings and limit values in the Quatronic
dialog, the Quatronic dialog performs these tasks for you. The necessary
values have already been stored in the Quatronic dialog for many products.
All of the product-specific settings can be globally programmed at the touch
of a button.
General parameters
Product
