890362_b•en•21.03.2011
We reserve the right to carry out improvements
7
2.2 Intended use
The WAREMA Quatronic dialog is used for the control of motorised sun
shading products. A variety of sun shading products and sensors can be
connected to the control.
WARAIAG
Please obtain the approval of the manufacturer if you have questions
regarding the connection of devices not listed in these instructions.
All control devices are intended to be installed
indoors
unless otherwise
specified.
WARAIAG
The approval of the manufacturer must be obtained for uses outside of the
purposes listed here. The consequences of unintended use may include
personal injuries of the operator or of third parties as well as property
damage to the control panel itself, to connected devices or to moveable
mechanical parts of the entire system.
Therefore use our product only as intended.
2.3 Target group
These instructions are addressed to persons operating, adjusting or commis-
sioning the control. The installation instructions (art. no. 890178) are avail-
able for persons installing, wiring or establishing a mains connection for the
WAREMA Quatronic dialog, including all necessary parts.
WARAIAG
Commissioning or operation by insufficiently qualified and knowledgeable
persons may cause serious damage to the system or even personal
injuries!
Commissioning may therefore only be performed by properly trained quali-
fied technicians. These technicians must be able to recognize sources of
danger that may be caused by the mechanical, electrical or electronic equip-
ment.
These qualified technicians must know and understand the content of these
instructions.
2.4 Retrofitting and
modifications
We have designed and built the WAREMA Quatronic dialog with reliability
and safety in mind. All required settings are made at initial commissioning.
Modification of the unit parameters is therefore only required when the char-
acteristics of the control need to be adjusted, changes are made to the sen-
sor equipment or the control itself is replaced.
WARAIAG
Retrofitting and modifications may impact the safety of the system or
reduce its effectiveness! Possible consequences may include death,
serious or light injuries, property or environmental damages.
Therefore, contact us or your specialist dealer before retrofitting or changing
the system or the unit parameters if you cannot find any information on the
corresponding topic in the control unit documentation. This is the only way to
ensure trouble-free retrofitting/modification.
Safety instructions
